PRODUCT DESCRIPTION:
100% Acrylic non yellowing sanding sealer. Offering a durable high build finish with excellent sandability and hold out. Can be used where you need to build a finish or seal the grain before using the Centurion Conversion Varnish or the Centurion waterbase polyurethane
APPLICATION REDUCTION AND CLEAN UP:
May be applied with conventional, HVLP, Airless or Air assisted airless equipment. IF reduction is necessary, use only water. DO NOT apply when the coating or ambient temperature is below 50 degrees. Clean up wet materials and flush paint lines and spray guns and equipment lines with water. Clean up dried material with an active solvent.
Main Properties:
Excellent Hardness
Fast Drying
For Sealer Applications
SURFACE PREPERATION:
The surface must be clean, dry and free of grease, oil, dirt, fingerprints and any other contamination to ensure proper adhesion. Remove any loose or peeling paint. Sand basecoat with 320-400 grit sandpaper. May be applied over acrylic, nitrocellulose and UV Base Coats. Test for adhesion and compatibility before full scale application.
Solids by Volume 31.73 (+/- 1%)
VOC 96 gms./liter
MSDS's are available upon request.
For Product delivery greater than 60 miles from the San Fernando Valley California please contact us for shipping information
You can also visit our library of references and helpful tips at our wood finishing Blog at: www.woodfinishings.wordpress.com
