Centurion "TL" Series Self Sealing Topcoat
• cs.3021 Flat • CS-3023 Semi
• CS-3022 Satin • CS·3024 Gloss
Product Description:
Premium color1ess, Clear Acrylic topcoat for high-end wood products. The volume solids and Clarity
provide a high build, durable, non-yellowing mar resistant coating.
Main Properties:
Excellent Hardness • very water resistant • For Self Sealer Applications where non yellowing is critical.
Recommended Usage:
General Purpose interior Applications • Interior Doors • Kitchen Cabinets • Interior
Shutters & Moldings
Application:
Application Method:
May be sprayed with conventional, airless and air assisted-airless application equipment
Mixing Instructions:
Ready to Spray. May be reduced as needed with acetone, retarder or preferred lacquer thinner
Substrate Preparation:
The surface must be clean, dry and free of grease, oil, dirt, fingerprints and any othercontamination to ensure proper adhesion. Remove any loose or peeling paint. Sand basecoat with320-400 grit sandpaper. May be applied over acrylic, nitrocellulose and UV Basecoats. Test foradhesion and compatibility before full scale application.
Application Instructions:
Mix well using a power agitator prior to application. On application, the temperature of theproduct, substrate and coating should be above 50 • F. Apply up to 3 coats, allowing sufficientdrying time between coats.
Coverage:
Approximately 327 square feet per gallon at 1 dry mil. @100% transfer efficiency. Actual coverage may vary depending on application technique, equipment and weather conditions.
Safety/ Clean Up:
Please read MSDS and product label before using. Applications tools must be cleaned with water after use. Dispose of any leftover coating in accordance with local, state or federal regulations.
Additional Notes:
Reduce and clean with Acetone.
Physical Properties
Curing/ Drying Time Properties
Vehicle Type Thermo Plastic Acrylic Air Drying Time (77° F 50% humidity)
Solids by Volume 18.50 (+/-1%) Oust Free 10-15 minutes
Solids by Weight 25.16 (+/-1%) Sand 20-25 minutes
Viscosity 25-27 sec. Zahn# 2
Specific Gravity .93
Package 24 -48 hours
voc Less Than 175 g/
Force Dry Time
Flash-off 10minutes
No more than 120° 20-30 minutes/package in 6 hours
For Product delivery greater than 60 miles from the San Fernando Valley California please contact us for shipping information
You can also visit our library of references and helpful tips at our wood finishing Blog at: www.woodfinishings.wordpress.com