Delivery to any location within 50 miles of our store!



Subscribe to our newsletter for periodic updates and valuable coupons.

Email Address:



This is just a test submission to show you how it looks, great, eh?

CIC, 2K White Acrylic Polyurethane Topcoat 1800 Series

Starting at: $82.53

  • Model: CIC.CW-311x
  • Shipping Weight: 12lbs
  • 98 Units in Stock
  • Manufactured by: CIC Coatings


A true two component acrylic polyurethane topcoat. Designed to be used in interior and exterior applications where extreme weather-ability and chemical resistance are required. Unlike most competitive polyurethanes The advanced chemistry involved is such to give you extreme durability far superior to "polyurethane" products that require little or no catalyzation. The Centurion Catalyzed Top Coat requires a 4:1 mix. with CW-4002 Hardener to form a fully cross linked bond that is superior to other products. This product can be tinted with the Centurion stains as well as other waterbased colorants. Visit our FAQ page here

  • Excellent resistance to marring and chemicals
  • Excellent weatherability
  • Excellent adhesion
  • Self-sealing capabilities
  • Velvet-like touch
  • High solids and excellent leveling
  • Outstanding non-yellowing transparency
  • Meets or exceeds KCMA performance specifications
  • Can be used on refinished or new wood


The surface must be clean, dry and free of grease, oil, dirt, fingerprints and any other contamination to ensure proper adhesion. Remove any loose or peeling paint. Sand base-coat with 320-400 grit sandpaper. When used as a sealer, use 220-320 grit sandpaper in between coats. Mix 4:1 with CW-4002 Hardener under agitation. May be mixed with tap water as needed.
May be applied over acrylic, nitrocellulose and UV Base-coats. Test for adhesion and compatibility before full scale application.


High Performance Interior/Exterior Applications
 Wood
 Ferrous/Non-Ferrous Metal
 Concrete/ Masonry
 Plastic


Approximately 510-560 square feet per gallon at 1 dry mil. Actual coverage may vary depending on application technique, equipment and weather conditions

Solids by Volume:%41.6

VOC:96 gms./liter

Catalyst sold separately
CW-4002 Hardener is sold separately and must be used in conjunction with this product, In the picture the hardener is shown but is sold as a separate Item.

For Product delivery greater than 60 miles from the San Fernando Valley California please contact us for shipping information

You can also visit our library of references and helpful tips at our wood finishing Blog at:

Please Choose:


Add to Cart:

Copyright © 2022 Annex Paint and Lacquer
Powered byZen Cart|  Developed by:IDEAS Creative Group

SSL  Authorize.Net