Delivery to any location within 50 miles of our store!



Subscribe to our newsletter for periodic updates and valuable coupons.

Email Address:



This is just a test submission to show you how it looks, great, eh?

Centurion 275 Water Clear Pre-cat Lacquer

Starting at: $35.98

  • Model: CS-3052
  • Shipping Weight: 11lbs
  • 77 Units in Stock
  • Manufactured by: CIC Coatings

Centurion 275 Water Clear Pre-cat Lacquer


• CS-3055 Flat • CS-3057 Semi

• CS-3056 Satin • CS-3058 Gloss


Product Description:
Premium colorless, single component precatalyzed amino/nitrocellulose topcoat for high·end wood·products. The volume solids and moisture resistance provide a high build, durable, non-yellowing mar resistant coating. Annex Paint has test this product and have found it to be more chemical resisitant than any of our previous PRe-Cats

Main Properties:
Excellent Hardness • Fast Drying • For Self Sealer Applications

Recommended Usage:
General Purpose interior Applications • Interior Doors· • Kitchen Cabinets • Interior Shutters & Moldings

Application Method:
May be sprayed with conventional, airless and air assisted·airless application equipment.

Mixing Instructions:
Ready to Spray. May be reduced as needed with acetone, retarder or preferred lacquer thinner.

Substrate Preparation:
The surface must be clean, dry and free of grease, oil, dirt, fingerprints and any othercontamination to ensure proper adhesion. Remove any loose or peeling paint. Sand basecoat with320-400 grit sandpaper. May be applied over acrylic, nitrocellulose and UV Basecoats. Test for adhesion and compatibility before full scale application.

Application Instructions:
Mix well using a power agitator prior to application. On application, the temperature of theproduct, substrate and coating should be above 50 • F. Apply up to 3 coats, allowing sufficient drying time between coats.

Approximately 285 square feet per gallon at 1 dry mil. @100% transfer efficiency. Actual coverage may vary depending on application technique, equipment and weather conditions.

Safety/ Clean Up:
Please read MSDS and product label before using. Applications tools must be cleaned with waterafter use. Dispose of any leftover coating in accordance with local, state or federal regulations.

Additional Notes:
Reduce and clean with Acetone.

Physical Properties

Curing/ Drying Time Properties

Vehicle Type Coconut Oil plasticized Amino/Nitrocellulose

Air Drying Time 17° F 50% humidity)

Solids by Volume 17.85 (+/- 1%) Dust Free 10-15 minutes

Solids by Weight 25.09 (+/-1%) Sand 20-25 minutes

voc Less Than 275 g/I Package 12 hours

Viscosity 33·35 sec. Zahn# 2

Specific Gravity .93

Force Dry Time

Flash off 10 mlnutes

No more than 120° F

20-30 minutes/package in 6 hours

For Product delivery greater than 60 miles from the San Fernando Valley California please contact us for shipping information

Please Choose:

Add to Cart:

Copyright © 2022 Annex Paint and Lacquer
Powered byZen Cart|  Developed by:IDEAS Creative Group

SSL  Authorize.Net