Delivery to any location within 50 miles of our store!



Subscribe to our newsletter for periodic updates and valuable coupons.

Email Address:



This is just a test submission to show you how it looks, great, eh?

Centurion Water clear Nitrocellulose Top Coat silver line

Starting at: $33.98

  • Model: CS-300(5,6,7,8)
  • 97 Units in Stock
  • Manufactured by: CIC Coatings

Centurion 275 , Silver line Water Clear Nitrocellulose Lacquer

• CS-3071 Flat • CS-3007 Semi

• CS-3072 Satin • CS-3008 Gloss

Product Description:

Premium colorless, nitrocellulose topcoat for high-end wood products. The volume solids and
toughness provide a high build, durable, non-yellowing mar resistant coating.

Main Properties:

Excellent Hardness • Fast Drying • For Self Sealer Applications

Recommended Usage:

General Purpose interior Applications • Interior Doors • Kitchen Cabinets • Interior • Shutters & Moldings


Application Method:
May be sprayed with conventional, airless and air assisted-airless application equipment.

Mixing Instructions:
Ready to Spray. May be reduced as needed with acetone, retarder or preferred lacquer thinner.

Substrate Preparation:   The surface must be clean, dry and free of grease, oil, dirt, fingerprints and any other contamination to ensure proper adhesion. Remove any loose or peeling paint. Sand basecoat with 320-400 grit sandpaper. May be applied over acrylic, nitrocellulose and UV Basecoats. Test for adhesion and compatibility before full scale application.

Application Instructions:
Mix well using a power agitator prior to application. On application, the temperature of the product, substrate and coating should be above 50 • F. Apply up tD 3 coats, allowing sufficient drying time between coats.

Approximately 257 square feet per gallon at 1 dry mil. @100% transfer efficiency. Actual coverage may vary depending on application technique, equipment and weather conditions.

Safety/ Clean Up:
Please read MSDS and product label before using. Applications tools must be cleaned with water after use. Dispose ofany leftover coating in accordance with local, state or federal regulations.

Additional Notes: Reduce and clean with Acetone.


Physical Properties

Curing/ Drying Time Properties

Vehicle Type Coconut Oil plasticized Nitrocellulose

Air Drying Time (77° F 50% humidity) .

Solids by Volume 16.05 {+/-1%) Dust Free 10-15 minutes

Solids by Weight 23.97 {+/- 1%) Sand 20-25 minutes
voc Less Than 275 g/I Package 12 hours.
Viscosity 33-35 sec. Zahn # 2

Specific Gravity .92

 Force Dry Time

Flash·off 10 minutes

No more than 120° 20-30 minutes/package in 6 hours


For Product delivery greater than 60 miles from the San Fernando Valley California please contact us for shipping information

You can also visit our library of references and helpful tips at our wood finishing Blog at:


Please Choose:

Add to Cart:

Copyright © 2022 Annex Paint and Lacquer
Powered byZen Cart|  Developed by:IDEAS Creative Group

SSL  Authorize.Net