Delivery to any location within 50 miles of our store!

Brands

Newsletter

Subscribe to our newsletter for periodic updates and valuable coupons.

Email Address:
HTML   TEXT-Only

Testimonials

Great

This is just a test submission to show you how it looks, great, eh?
Read More ->



CIC CW 1K/2K polyurethane Top coat 2800 series


Starting at: $69.80

  • Model: CIC CW 3025 (26,28)
  • Shipping Weight: 10lbs
  • 23 Units in Stock
  • Manufactured by: CIC Coatings



This multi-purpose, fast-drying clear polyurethane topcoat/sealer is the most versatile water-based coating on the market.  It offers outstanding sandablity and colorfastness and provides excellent chemical and humidity resistance along with superior protection against abrasions, black heel marks, and UV degradation. Designed for durability and performance on a variety of high-end architectural millwork, hardwood flooring, and cabinetry, it brings a natural, warm look to wood. Visit our FAQ page here.

Product Description:
An aqueous blend of an aliphatic polyester/polycarbonate combined with a crosslinked castor oil based
polyurethane. Used as both a sealer and topcoat, this multi-purpose coating offers excellent chemical and
humidity resistance while offering outstanding color fastness and resistance to UV degradation. The fully cured
film provides superior resistance to abrasion and black heel marks, it brings a natural “warming” look to the
wood. Designed for durability and performance, this coating can be used for a variety of high end architectural
mill work or wood floor applications. Up to 20% of the vehicle solids used in production of this product are
“new growing” raw-materials.

This product can be used 1K or 2K with our CW-4002 Polyurethane Catalyst. It can also be used with our CW-4001 Crosslinker.

Products include: CW-3025 – CW-3028, CW-4001 – CW-4002

  • Fast drying
  • Sandability
  • Easy hardness development
  • Abrasion resistance
  • Durability
  • Excellent adhesion
  • Self-sealing capabilities
  • Velvet-like touch
  • High solids and excellent leveling
  • Great stack time
  • Can be used on refinished or new wood


Recommended for…

  • High-end furniture
  • Cabinetry
  • Harwood flooring
  • Architectural millwork


This product can be used 1K or 2K with our CW-4002 Polyurethane Catalyst. It can also be used with our CW-4001 Crosslinker.

Products include: CW-3025 – CW-3028, CW-4001 – CW-4002

Centurion™ Polyurethane Topcoat
 CW-3025 W/B Clear Polyurethane Topcoat (Flat)
 CW-3026 W/B Clear Polyurethane Topcoat (Satin)
 CW-3028 W/B Clear Polyurethane Topcoat (Gloss)
 

Application:
Application Method: May be sprayed with conventional, airless and air assisted-airless application equipment.
Mixing Instructions: Ready to Spray. DO NOT over thin; product should be sprayed as supplied.
 

SubstratePreparation:
The surface must be clean, dry and free of grease, oil, dirt, fingerprints and any other contamination to
ensure proper adhesion. Remove any loose or peeling paint. Sand basecoat with 320-400 grit sandpaper.
When used as a sealer, use 220-320 grit sandpaper in between coats. May be applied over acrylic,
nitrocellulose and UV Basecoats. Test for adhesion and compatibility before full scale application.
 

Application  Instructions:
Mix well using a power agitator prior to application. On application, the temperature of the product,
substrate and coating should be above 50 º F. Apply up to 3 coats, allowing sufficient drying time between
coats.
Coverage: Approximately 481-545 square feet per gallon at 1 dry mil. Actual coverage may vary depending on
application technique, equipment and weather conditions.
Safety/ Clean Up: Please read MSDS and product label before using. Applications tools must be cleaned with water after use.
Dispose of any leftover coating in accordance with local, state or federal regulations.

Please Choose:



Add to Cart:



Copyright © 2021 Annex Paint and Lacquer
Powered byZen Cart|  Developed by:IDEAS Creative Group

SSL  Authorize.Net